BZZNB - 01963 TM GEAR LUBE PREMIUM

  • MSDS: BZZNB
  • Manufacturer: TEXACO LUBRICANTS CO
  • Product Name: 01963 TM GEAR LUBE PREMIUM
  • National Stock Number: 9150-00N009009
Product Identification

Product ID:01963 TM GEAR LUBE PREMIUM
MSDS Date:12/05/1990
FSC:9150
NIIN:00N009009
MSDS Number: BZZNB

Responsible Party
TEXACO LUBRICANTS CO
HOUSTON, TX 77210-4427
US

Emergency Phone: 914-831-3400;800-424-9300(CHEMTREC)

Info Phone: 914-838-7204

Cage: OTTJ3

Contractor
TEXACO PIPELINE INC (SUB OF TEXACO INC)
42286 HOUSTON, TX 77242-2286 US

Telephone: 713-953-4260

Cage: 3B431

Ingredients

GAS IN TENDON SHEATHS OR SOFT TISSUE.

RTECS: 9999999ZZ


DISPOSE OF IN ACCORDANCE WITH LOCAL,

RTECS: 9999999ZZ


KEEP CONTAINER CLOSED AND DRUM BUNGS IN PLACE.

RTECS: 9999999ZZ


CLEANED AT LEAST ONCE A WEEK. DRY CLEANING

RTECS: 9999999ZZ


LAUNDERING. INFORM INDIVIDUALS RESPONSIBLE FOR

RTECS: 9999999ZZ


80-94.99)

CAS: 8052-42-4

RTECS: CI9900000

Fraction By Weight: SEE ING

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3; (FUME)


0.01-0.09)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: SEE ING

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


MINERAL OIL; (HYDROTREATED C25 BRIGHT-BASED LUBRICATING

CAS: 72623-83-7

Fraction By Weight: 3-10.99%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


100 (% WT EXCLUDING FEDERALLY

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K


TOLUENE APPEARS ON NAVY LISTING OF OCCUP

RTECS: 9999999ZZ


PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE

RTECS: 9999999ZZ


REHEATED OXIDIZED ASPHALT HAVE BEEN SHOWN TO CAUSE

RTECS: 9999999ZZ


W/OUT ANY EFFORT TO REMOVE MATL BETWEEN

RTECS: 9999999ZZ


HYDROCARBON SOLVENTS (ASPHALT EXTRACTS) ARE

RTECS: 9999999ZZ


TREATED CAN CAUSE SEV INJURY. MOST DMG

RTECS: 9999999ZZ


ALL RESIDUAL MATL CAN RSLT IN DISFIGUREMENT, LOSS

RTECS: 9999999ZZ


THE EXTENT OF THE INJURY CANNOT BE DETERMINED BY

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT): > 5 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: MAY CAUSE MIN IRRIT,
EXPERIENCED AS TEMPORARY DISCOMFORT. SKIN: NO ADVERSE EFTS EXPECTED
FROM ABSORPTION OF MATL THRU SKIN. PRLNG CONT, AS W/CLTHG WETTED
W/MATL, MAY CAUSE DEFAT OF SKIN/IR RIT, SEEN AS LOC REDNESS W/POSS
MILD DISCOMFORT. INHAL: PROD NOT VOLAT AT AMBIENT TEMPS. NO ADVERSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EFTS EXPECTED FROM VAP GENERATED AT
AMBIENT TEMPS. INGEST: IF MORE THAN SEVERAL MOUTHFULS SWALLOWED,
ABDOM DISCOMFORT, NAUS, & DIARR MAY OCCUR. MATL FROM HIGH PRESS
EQUIP, PINHOLE LEAKS/HIGH PRESS LINE FAILURE CAN PENETRATE SKIN &,
IF NOT PROPERLY TREATED, CAN CAUSE SEV INJURY, INCL DISFIGUREMENT,
(SUP DAT)
Medical Cond Aggravated by Exposure:BECAUSE OF ITS DEFATTING
PROPERTIES, PROLONGED AND REPEATED SKIN CONTACT MAY AGGRAVATE AND
EXISTING DERMATITIS (SKIN CONDITION).

First Aid

First Aid:EYE: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. GET MED
ATTN IF IRRIT PERSISTS. SKIN: WASH W/PLENTY OF SOAP & WATER FOR
SEVERAL MIN. GET MED ATTN IF IRRIT DEVELOPS/PERSISTS. INGEST: IF
MORE THAN SEV ERAL MOUTHFULS SWALLOWED, GIVE 2 GLASSES OF WATER (16
OZ). GET MED ATTN. INHAL: IF IRRIT/DROW OCCURS, REMOVE TO FRESH
AIR. NOTE TO MD: HIGH PRESS INJECTION OFMATL INTO SKIN, IF NOT
PROPERLY (ING 10)

Fire Fighting

Flash Point Method:COC
Flash Point:>300F,>149C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER/FOAM MAY CAUSE FROTHING. USE WATER TO COOL FIRE-EXPOSED
CONTRS. IF LEAK/SPILL HAS NOT (SUP DAT)
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CONTAIN SPILL IF POSSIBLE, CONTAIN WITH
ABSORBENT MATERIAL SUCH AS CLAY OR SOIL, AND SHOVEL UP. AVOID SKIN
AND EYE CONTAACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MINIMUM FEASIBLE TEMPERATURES SHOULD
BE MAINTAINED. PERIODS OF EXPOS TO HIGH TEMPERATURES SHOULD BE
MINIMIZED. WATER CONTAMINATION SHOULD BE AVOIDED.
Other Precautions:MISUSE OF EMPTY CONTRS CAN BE HAZ. EMPTY CONTRS CAN
BE HAZ IF USED TO STORE TOX, FLAM/REACTIVE MATLS. CUTTING/WELDING
OF EMPTY CONTRS MIGHT CAUSE FIRE, EXPLO/TOX FUMES FROM RESIDUES. DO
NOT PRESSURIZE /EXPOSE TO OPEN FLAME/HEAT. (ING 15)

Exposure Controls

Respiratory Protection:AIRBORNE CONCS SHOULD BE KEPT TO LOWEST LEVELS
POSS. IF VAP, MIST/DUST IS GENERATED, USE NIOSH/MSHA APPRVD RESP AS
APPROP. SUPP AIR RESP PROT SHOULD BE USED FOR CLEANING LGE
SPILLS/UPON ENTRY INTO TAN KS, VESSELS/OTHER CONFINED SPACES.
Ventilation:ADEQUATE TO MEET COMPONENT OCCUPATIONAL EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WORKERS SHOULD WASH EXPOSED SKIN SEVERAL TIMES
DAILY W/SOAP & WATER. SOILED WORK CLTHG SHOULD BE LAUNDERED/DRY
(ING 16)
Supplemental Safety and Health
FIRE FIGHT PROC: IGNITED, USE WATER SPRAY TO DISPERSE VAPS & TO PROVIDE
PROT FOR PERS ATTEMPTING TO STOP LEAK. EFTS OF OVEREXP: LOSS OF
FUNCTION/EVEN REQUIRE AMPUTATION OF AFFECTED AREA. TO PVNT SUCH
SERIOUS INJURY, IMMED MED ATTN SHOULD BE SOUGHT EVEN IF INJECTION
INJURY APPEARS TO BE MINOR. (ING 5)

Chemical Properties

Vapor Pres:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SMOOTH BLACK, WITH SLIGHT PUNGENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOX LEVELS OF CARBON MONOXIDE, CARBON
DIOXIDE, IRRIT ALDEHYDES & KETONES, & COMBUST PRODS OF CMPDS OF
NITROGEN, SULFUR.

Disposal

Waste Disposal Methods:UNDER RCRA, IT IS RESPONSIBILITY OF USER OF PROD
TO DETERMINE AT TIME OF DISP, WHETHER PROD MEETS RCRA CRITERIA FOR
HAZ WASTE. THIS IS BECAUSE PROD USES, TRANSFORMATIONS, MIX,
PROCESSES, ETC, MAY REND ER THE RESULTING MATERIALS HAZARDOUS. (ING
14)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.